Reno Nevada Sealcoating Contractors Done Right: Tips From the ExpertsApplying parking lot or driveway sealer looks easy. However, there is a right and wrong way to do things. Not all sealcoating contractors will deliver that pristine finish and robust protection you want. Inexperienced service providers can make many mistakes that compromise your pavement. In this blog, you’ll learn several tips and tricks that expert Reno Nevada sealcoating contractors employ to get the best results possible.
Sealcoating in Reno Nevada is so transformative that many incorrectly assume it’s a quick fix for all their pavement problems. However, asphalt sealcoating is a preventive measure, not a repair solution.
Before scheduling your service appointment, have sealcoating companies inspect your pavement. They can identify issues that need addressing, including cracks, potholes, surface raveling, and more. It’s only after you complete necessary repairs that you should begin asphalt sealcoating in Reno.
Attempting to seal over damage will only result in an ugly finish. Even worse, the driveway sealer will do nothing to protect your blacktop paving against further damage. Those issues will worsen, and you’ll have a lot more to deal with later.
Here’s the secret to smooth, beautiful, and long-lasting sealcoating in Reno Nevada. Asphalt surfaces are notorious for getting filthy. Because they have a dark black color, you often can’t tell how dirty your pavement is until you touch it with your bare hands.
That layer of grime will prevent the driveway sealer from bonding to the asphalt. Instead, it may peel up shortly after curing, leaving your pavement unprotected.
For the best results, clean your paved surfaces. Pick up trash, sweep away loose debris, and consider washing the pavement. Sealcoating companies can come in to inspect your pavement and tie up any preparation loose ends, which may involve applying a pretreatment solution to stubborn stains.
As with anything else, the quality of your finished driveway sealcoating in Reno hinges on the materials used. There are plenty of cheap driveway sealers you can buy at big-box stores. However, they often have a low bitumen content, which provides little coverage and protection.
The best sealcoating companies use premium coal-tar or asphalt-emulsion sealers. Then they prepare them according to the manufacturer’s guidelines. That could involve adding a specific amount of fine aggregates and water. Never cut corners here. Cheapening out on materials or preparing the mix incorrectly could produce an awful finish.
Asphalt sealcoating is a service best left to the spring and summer months. Driveway sealers cure via evaporation. Once applied, the water evaporates, leaving the protective bitumen behind.
When temperatures are low or humidity levels are high, the sealer can struggle to cure. That’s why seasoned sealcoating companies always keep a close eye on the weather forecast. The best conditions for asphalt sealcoating are:
• Temperatures of around 70 degrees Fahrenheit
• Humidity levels less than 50%
• Slow and steady wind speeds
• At least four hours of direct sunlight
• Zero chance of rain.
One common mistake amateurs make when driveway sealcoating in Reno is applying one thick coat. That might seem to save time, but it often leads to major curing issues.
Companies with experience sealcoating in Reno Nevada use squeegees or sprayers to apply thin coats. They allow coats to dry before building up coverage, applying more layers in high-traffic areas. This approach ensures that the sealer cures evenly while still providing an opaque finish.
After asphalt sealcoating in Reno, you need to stay off the pavement for 24 to 48 hours as the sealer cures. Don’t make the mistake of walking onto your pavement. Even if it feels dry to the touch, the sealer could still be soft.
Driving onto uncured sealer will leave behind ugly track marks. You may even peel up half-cured product and spread it where you don’t want it. Heed the advice of sealcoating companies and wait to get the all-clear before resuming normal traffic.
When you turn to Affordable Striping & Sealing, you don’t have to worry about simple mistakes. We have decades of experience and work hard to do things right. While others cut corners, we work vigilantly by the book, maintaining the highest quality standards for our clients.
You can turn to us for asphalt sealcoating, crack repairs, parking lot layout design, striping, ongoing maintenance, and more. Ready to work with a contractor you can count on? Call Affordable Striping & Sealing today at (775) 825-1101, email RenoOffice@affordablestriping.com, or use our online form to reach out, learn more, and request a free quote.
Our company has been serving the community for over 30 years. During this time, we’ve established a reputation for upholding honesty and integrity within the industry.
NV Contractors License 67803, Limit $5,500,000
